DHT - Designers and Manufacturers of Heat Transfer Equipment
  HomeContactInd & AppsCust AssembliesNewsStds & CodesGalleryArticlesNational RepsLine Card  
 

Techtanium Indirect Water Heaters
 
Techtanium Indirect Water Heaters

Delivers all the hot water that's needed - quickly and efficiently - with long lasting performance built in. Designed and engineered for high performance at low cost... with a warranty for a long life.

 

TECHTANIUM Brochure


TECHTANIUM Manual and Warranty
(Effective on/about May 2014)

TECHTANIUM Manual and Warranty
(PREVIOUS VERSION)

NEW MP-SERIES TECHTANIUM™ Indirect Water Heaters Brochure

MP-SERIES Installation Manual

 

Warranty Registration Form

 

TECHTANIUM PERFORMANCE
• Environmental and installer friendly
• Works with any hydronic heat source for domestic hot water
• Supplies abundant hot water
• Saves energy and money
• Minimal heat loss

 

 

TECHTANIUM MANUFACTURING
• Exterior steel jacket with powder coat paint
• Polyurethane foam for outstanding insulation and reduced power consumption–CFC free
• Carbon steel tank with oven glazed titanium glass liner for added strength and durability
• All models supplied with two magnesium anti-corrosion anodes
• Available in a range of convenient sizes and footprints
• State-of-the-art European Manufacturing
• 7 YEAR LIMITED WARRANTY
 

 
A Temp. & Press. Relief Valve
B Domestic Hot Water Outlet
C Recirculation (TT-79, TT-119)
D Boiler Water Inlet (Supply)
E Control
F Domestic Cold Water Inlet
G Boiler Water Outlet (Return)

 

PERFORMANCE RATINGS TT-40 TT-55 TT-79 TT-119
CAPACITY (Gallons) 40 55 79 119
HEAT EXCHANGER SURFACE AREA SQ.FT. 14 14 26 26
RECOMM. FLOW RATE GPM (Boiler Water) 10 10 14 14
PRESSURE DROP PSI (Heat Exchanger) 2.3 2.3 11 11
FIRST HR. RATINGS GPH 90 DEGREE RISE 188 225 295 376
CONTINUOUS FLOW GPH 90 DEGREE RISE 160 187 240 293
FIRST HR. RATINGS GPH 70 DEGREE RISE 233 277 363 460
CONTINUOUS FLOW GPH 70 DEGREE RISE 205 239 308 377
BOILER SIZE BTU'S REQUIRED 120,000 140,000 180,000 220,000
NOTE: Above ratings based on boiler maintaining temperature of 180 degree's Fahrenheit

PRODUCT SPECIFICATIONS TT-40 TT-55 TT-79 TT-119
CONNECTIONS (inch) – All Tappings Are Female Thread Except Where Noted.*
TEMP. & PRESS. RELIEF VALVE 3/4” 3/4” 3/4” 3/4”
DOMESTIC HOT WATER OUTLET 3/4” 3/4” 1”mpt
DOMESTIC COLD WATER INLET 3/4” 3/4” 1”mpt
BOILER WATER OUTLET (RETURN)
CONTROL 1/2“ 1/2“ 1/2“ 1/2“
BOILER WATER INLET (SUPPLY)
RECIRCULATON (TT-79, TT-119) - - 3/4” 3/4”
*TT-119 also supplied with adapter to increase from 1" Male to 1 1/4" Female, for Domestic Hot and Cold. TT-119 also has Inspection Port, with access near bottom of tank for removal of any sediment build up.

DIMENSIONS TT-40 TT-55 TT-79 TT-119
DIAMETER 20.0” 20.0” 22.0" 28.0"
HEIGHT 45" 58" 71" 68"
SHIPPING WEIGHT (Lbs.) 124 143 243 355
 


Diversified Heat Transfer Inc.
, 439 Main Road, Route 202 Towaco, NJ 07082
Tel: 800-221-1522 • Fax: 855-221-2400 • Email: dht@dhtnet.com • Website: www.DHTNET.com